Varitap VPR series (RoHS2 compliant)

item Varitap VPR series (RoHS2 compliant)

Thyristor power regulator
Varitap VPR series (RoHS2 compliant)0
バリタップ　VPRシリーズ（RoHS2対応）0
Specifications VP series fully RoHS compliant
VariTap is a registered trademark of thyristor type AC power regulators.
Characteristics Easy adjustment: Just turn the knob to adjust the voltage. (Knob sold separately)
Easy to install: Easy to install with one screw (5A) or two screws (10A).
Lower limit voltage adjustable: Already adjusted to 15±5V at 50Hz. Can be adjusted with a trimmer for use at 60Hz.
With control contact terminal: The main circuit can be opened and closed with a small-capacity contact.
ETC Temperature control, lamp dimming, power adjustment
Request a catalog for this product
Specifications
Type VPR-A VPR-C
Control Method Phase Control Phase Control
Setting method Manual setting (built-in setting device), non-voltage contact Manual setting (built-in setting device), non-voltage contact
Number of phases Single Phase Single Phase
Frequency 50/60Hz 50/60Hz
Rated Circuit Voltage 100/110V 200/220V
Voltage Fluctuation Range ±10% of rated circuit voltage ±10% of rated circuit voltage
Rated Current 5A, 10A 5A, 10A
Output Adjustment Range 15~98% of input voltage 7.5 to 98% of input voltage
Ambient temperature 0~40℃ (current reduction above 40℃) 0~40℃ (current reduction above 40℃)
Minimum Load Current 100mA 100mA
Insulation resistance Power circuit: Grounded DC500V megger 50MΩ or more Power circuit: Grounded DC500V megger 50MΩ or more
Dielectric Strength Power circuit: Grounded AC 1kV 1 minute Power circuit: Grounded AC 1kV 1 minute
Accessories Scale plate Scale plate
Request a catalog for this product
Product Specifications
Varitap VPR series (RoHS2 compliant) Specifications
VPR-A Type Circuit voltage: 100V/110V
Model Rated Current Capacity Body dimensions Mass
VPR-05AN　(RoHS2 compliant)
5.0A
500VA
 40×109×42
160g
(including shaft length 19mm)
VPR-10A　(RoHS2 compliant)
10.0A
1kVA
 70×148×70
450g
(including shaft length 13mm)
         
VPR-C Type Circuit voltage: 200V/220V
Model Rated Current Capacity Body dimensions Mass
VPR-05CN　(RoHS2 compliant)
5.0A
1kVA
 40×109×42
160g
(including shaft length 19mm)
VPR-10C　(RoHS2 compliant)
10.0A
2kVA
 70×148×70
450g
(including shaft length 13mm)
< Back to list
page top
CONTACT